Select Page

Support Center for IP-PBX and VoIP Products

Technical information suitable for those who have already purchased Xorcom products and want to increase their knowledge about them.

Building Astribank Drivers from Source

Astribank drivers are part of DAHDI packages. So in most of the cases, you can use the binary packages from your Linux distribution repositories. But sometimes you may want to build the DAHDI drivers from sources. In this article, we will give you outlines of the...

How to install ccStatsPro on CompletePBX 5.x

1. Make sure that the PBX is connected to the Internet and the DNS settings are correct. 2. Install the Call Center Statistic module: cd /root wget http://updates.xorcom.com/~xorcom/ccstatspro-inst.sh chmod +x ccstatspro-inst.sh ./ccstatspro-inst.sh The script will...

How to install ccStatsPro on CompletePBX 4.x

1. Make sure that the PBX is connected to the Internet and the DNS settings are correct. 2. Install the Call Center Statistic module: cd /root wget http://updates.xorcom.com/~xorcom/ccstatspro-inst.sh chmod +x ccstatspro-inst.sh ./ccstatspro-inst.sh The script will...

How to install ccStatsPro on CompletePBX 4.x Twinstar

Make sure that the PBX is connected to the Internet and the DNS settings are correct. 1. On srv-a Install ccStatsPro on the srv-a as it is described in this Wiki article: http://wiki.xorcom.com/How_to_install_ccStatsPro_on_CompletePBX 2. On srv-a Move ccStatsPro files...

How to install Complete Concierge

You can install the Complete Concierge on the PBX as follows: 1. Copy the complete_concierge-3.0.7.tgz to the /var/www/html/admin/modules folder http://updates.xorcom.com/servers/complete-concierge/complete_concierge-3.0.7.tgz cd /var/www/html/admin/modules wget...

Spark Logging

Journal Logging – Introduction In Spark units, the logging system has undergone some changes. Previously, log files such as maillog and Apache error_log (among others) were handled by numerous daemons and processes such as syslog, which commonly placed the logs...

How to Setup and Use a Rapid Tunneling Server

Version: 1.15 The Rapid Tunneling server software was developed and tested on CentOS 5.X systems. Xorcom provides RPM for easy server installation in CentOS. Please contact Xorcom technical support (support@xorcom.com) if you want to set up the Rapid Tunneling server...

Upgrading CXS1000 Spark Servers

Document version: 1.1 This document provides instructions for upgrading Xorcom CXS1000 (Spark) Servers running CompletePBX v.4.5.x to the latest available software version. Please check that the server has working Internet access. Upgrade Procedure 1. Connect to the...

Upgrading Xorcom Servers with Elastix installed

Document version: 1.0 1. The TwinStar servers Any software upgrade of TwinStar servers must be performed according to corresponding Xorcom document: Updating Xorcom TwinStar XE2000/3000 with Elastix 2.x Installed Upgrading Xorcom TwinStar XE2000/3000, XR2000/3000,...

Related Topics:
Share This